Printer Assembly; Setup Before Printing; Calibration Flow - Prusa Research Original Prusa i3 MK2 Handbook

6.2 Printer assembly

With Original Prusa i3 MK2 ​ p rinter​ kit we suggest to follow the guidelines and
assemble the kit according to the the ​ o nline​ manual at ​
manual is available in several languages on the website). The construction of the
printer​ should not take more than one working day. After a successful completion
continue to the chapter ​

6.3 Setup before printing

● Place the ​ p rinter​ to a horizontally stable position, best place is a workbench where
there is no risk of ​ d raft​ .
● Attach the ​ f ilament​ holders to the upper frame.
● Attach ​ F ilament​ to the holders. Make sure the ​ f ilament​ spool doesn't jam and can
move freely.
● Plug in the AC power cord, check to make sure the proper setting for AC voltage is
selected (110V/220V) and turn on the switch.
● Check out the firmware version (in the Support menu via LCD panel) and if it's older
than 3.0.6, please upgrade to the latest one from our website ­
http://www.prusa3d.com/drivers/​
calibration flow. Version 3.0.6 is preinstalled on printers shipped from August 9,
2016.
Filament ​ i s a common ​ t erm​ for the ​ p lastic rod ​ ­ ​ m aterial​ provided on a spool from
which 3D objects are printed.

6.3.1 Calibration flow

6 .3 Setup before printing​
otherwise you won't be able to follow our new
m anual.prusa3d.com​
.
. (​ O nline