Job Options Key - Oki S700 User Manual

JOB OPTIONS KEY

This key is used to change settings for the next copying job. Press the
Job Options key to advance through the items, and the L/M keys to
change their settings. Pressing Select is not required, since these
values are not saved.
The default values for each item are those chosen in the Menu key
table above. Values changed with this key will revert to their default
settings after about 3 minutes of inactivity.
Press All Clear to reset all temporary settings back to their user
default values (those defined using the Menu key) immediately.
Press and hold All Clear to reset all settings back to their factory
defaults.
Item
Media
Duplex
Input Tray
Output
Collate
Fit to A3
Punch
Staple
Settings
Plain Paper, Ultra Heavy,
Transparency
Off, ShortEg, LongEg
Auto, MP
Prt/F-Dn, Prt/F-Up, Fin/F-Up,
Fin/F-Dn
On, Off
Off, On
Off, Top Edge, Left Edge
Off, On
MENUS AND SETTINGS > 46
Explanation
Selects the type of media to be
printed on.
Selects single-sided (Off) or
double-sided copying (from
single-sided originals).
Selects the printer feed tray.
Selects output stacking tray if the
printer supports this feature.
Adjusts magnification to fit A3
paper if printer supports this
size.
Selects output hole punching if
the printer supports this feature.
Selects output stapling if the
printer supports this feature.