Marantz AV8802A Owner's Manual page 301

Contents Connections
z1 The applicable sound mode includes "Dolby Surround" and sound modes that have "+Dolby Surround" in the sound mode name.
z2 The applicable sound mode includes "DTS Neo:X" and sound modes that have "+Neo:X" in the sound mode name.
z3 A signal for each channel contained in an input signal is output as audio.
z4 Audio is not output when "Speaker Config." - "Surr. Back" in the menu is set to "1 spkr". (v p. 230)
z5 Audio is output from the speakers specified in the "Surround Parameter" – "Speaker Select" settings. (v p. 180)
z6 Audio is output from the speakers specified in the "Audyssey DSX
z7 Audio is output when "Subwoofer Mode" in the menu is set to "LFE+Main". (v p. 237)
Upgrade (Auro-3D)
Sound mode
Front
L/R
Auro-3D S
Auro-2D Surround S
z8 This is output if an Auro-3D signal is input and the input signal contains Top Surround.
Front panel Display
Playback
®
Surround Front
Surround
Center Back Wide
L/R
L/R L/R
D D
D D D
Rear panel
Settings
" settings. (v p. 186)
Channel output
Front Top Top Top
Height Front Middle Rear
L/R L/R L/R L/R
D
301 Remote
Tips
Front Surround
Rear Surround Dolby
Top
Height Height Atmos
Surround
L/R L/R Enabled
L/R
D Dz8
Index
Appendix
Back
Dolby Dolby
Atmos Atmos Subwoofer
Enabled Enabled
L/R L/R
D
D