Marantz AV8802A Owner's Manual page 218

Contents Connections
Manual Setup
Perform when setting the speakers manually or when changing settings
made in Audyssey ® Setup.
If you change the speaker settings after performing Audyssey
0
you will no longer be able to select Audyssey MultEQ
Dynamic EQ or Audyssey Dynamic Volume
®
This unit can be used without changing "Manual Setup" settings. Please
0
set if necessary.
Front panel Display
Playback
Setup,
®
XT32, Audyssey
®
. (v p. 183 - 185)
®
Rear panel 218
Settings
Amp Assign
You can change the Pre Amplifier assignment according to your speaker
system.
o Assign Mode
Select how to use the Pre Amplifier.
You need to configure the detailed settings for the speaker
configuration in accordance with the selected mode. Select Assign
Mode configure the corresponding detailed settings.
All Pre Amplifiers for this unit are used for MAIN ZONE.
0
Up to 13.1-channels can be connected for MAIN ZONE.
0
11.1ch
The speakers play back up to 11.1-channels in
(Default):
accordance with the input signal and sound mode.
(v p. 219)
The Pre Amplifier of this unit is assigned to 2-channels
0
for creating bi-amp connections with the front speaker.
9.1ch (Bi- Up to 11.1-channels can be connected for MAIN ZONE.
0
Amp):
The speakers play back up to 9.1-channels in
accordance with the input signal and sound mode.
(v p. 222)
Remote
Tips Appendix
Index