Marantz AV8802A Owner's Manual page 268

Contents Connections
Specifying the zone used with the remote control unit
ZONE
SELECT
Front panel Display
Playback Settings
When the ZONE SELECT is pressed, only the set zone can be operated
with the remote control unit.
This is useful for preventing mistaken operation.
The factory setting is "M23".
0
SET
1
2
ui
ENTER
Rear panel 268
Tips
Press and hold ZONE SELECT and SET for at least 3
seconds.
Use ui to set the zone to be used and press ENTER.
"SET" flashes four times on the remote control unit and the normal
operation mode is restored.
Remote control unit display
M
M2
M23
Remote Index
Appendix
Zone to be used
MAIN ZONE only
MAIN ZONE / ZONE2
MAIN ZONE / ZONE2 / ZONE3