Contents
Connections
Upgrade (Auro-3D)
o Detailed setting when "Assign Mode" is set to
"Auro-3D"
When "Assign Mode" is set to "Auro-3D", set the following items.
n Layout
Select the speaker layout for Auro-3D playback
This is a layout that adds the front height and
surround height speakers to the basic 5.1 channel
Auro 9.1ch
layout.
Connect the front height speakers to the HEIGHT1
(Default):
PRE OUT connectors and the surround height
speakers to the HEIGHT2 PRE OUT connectors.
This is a layout that adds the front height, surround
height and top surround speakers to the basic 5.1
channel layout.
Connect the front height speakers to the HEIGHT1
Auro 10.1ch:
PRE OUT connectors and the surround height
speakers to the HEIGHT2 PRE OUT connectors.
And connect the top surround speaker to
SUBWOOFER 2 PRE OUT connector.
In this setting, you can't use the second subwoofer.
Front panel
Display
Playback
Settings
o View Terminal Config.
This shows how to connect the PRE OUT connectors for your "Amp
Assign" setting on the menu screen.
Rear panel
228
Tips
Remote
Index
Appendix