Marantz AV8802A Owner's Manual page 210

Contents Connections
3
Connect the Sound calibration microphone to the
SETUP MIC jack of this unit.
When the Sound calibration microphone is
connected, the following screen is displayed.
Audyssey Setup
Your AV preamp can automatically measure the acoustics of
your room then optimize your speakers using the included
microphone and microphone stand.
Set the following items
if necessary.
Amp Assign
Channel Select
Check Results
Restore...
Start
Front panel Display
Playback Settings
4
Select "Start", then press ENTER.
Audyssey
5
Follow the instructions on the screen display and press
"Next" to proceed further.
Rear panel 210
Tips
® Setup can also make the following settings.
Amp Assign
0
The signals output from the SURROUND BACK, HEIGHT1 and
HEIGHT2 PRE OUT connectors can be switched in accordance
with your speaker environment. (Amp Assign (v p. 218))
Channel Select
0
If channels that are not to be used are set in advance,
measurement for the set channels is skipped, and measuring
time can be reduced. You can also change the number of
surround back speakers and subwoofer.
Remote Index
Appendix