Marantz AV8802A Owner's Manual page 247

Contents Connections
o Lch Level
Adjust the left channel output level.
-12 dB – +12 dB (Default : 0 dB)
o Rch Level
Adjust the right channel output level.
-12 dB – +12 dB (Default : 0 dB)
o Channel
Set whether to playback in stereo or monaural.
Stereo
Stereo playback.
(Default):
Mono: Monaural playback.
o HDMI Audio (ZONE2 only)
Selects the audio signal format for playing an HDMI source in ZONE2.
Through The HDMI audio signal is passed through this unit to the
(Default): device in ZONE2.
The HDMI audio signal input into this unit is converted to a
PCM: PCM signal that can be output from the ZONE2 PRE OUT
connectors.
Front panel Display
Playback Settings
o Volume Level
Set the volume output level.
Variable
(Default):
1 – 98
(–79.5 dB – 18.0 dB):
o Volume Limit
Make a setting for maximum volume.
60 (-20 dB) / 70 (-10 dB) / 80 (0 dB)
(Default : 70 (-10 dB))
Off:
This can be set when "Volume Level" is set to "Variable". (v p. 247)
Rear panel 247
Tips
Volume can be adjusted.
Volume is fixed at the desired level. The
volume cannot be adjusting using the remote
control unit.
Do not set a maximum volume.
Remote Index
Appendix