Marantz AV8802A Owner's Manual page 222

Contents Connections
o Detailed settings when "Assign Mode" is set to
"9.1ch (Bi-Amp)"
When "Assign Mode" is set to "9.1ch (Bi-Amp)", set the following items.
n Pre-out for Bi-Amp
Select the PRE OUT connectors used for the bi-amp connection of
front speakers.
Make the bi-amp connection by using the FRONT
FRONT WIDE
PRE OUT connectors and FRONT WIDE PRE
(Default):
OUT connectors.
Make the bi-amp connection by using the FRONT
HEIGHT1: PRE OUT connectors and HEIGHT1 PRE OUT
connectors.
Make the bi-amp connection by using the FRONT
SURROUND
PRE OUT connectors and SURROUND BACK
BACK:
PRE OUT connectors.
Front panel Display
Playback Settings
n Height Speakers
Select the number of the height speakers used in MAIN ZONE.
None:
2 Height Speakers
(Default):
4 Height Speakers:
Using Dolby Speakers:
Rear panel 222
Tips
Uses no height speakers.
Uses a set of (two) height speakers.
Uses two sets of (four) height speakers.
Select when the Dolby Atmos Enabled
speakers are connected.
Remote Index
Appendix