Fujitsu M3096GX Instruction Manual page 68

- Function: Byte 1C
Selects functions from the table below. This scanner returns X'0E' or X'0F'.
Byte Bit
1C Bit 0 Data overflow
This bit is set to 1 for an image scanner in which an overflow can occur.
The bit is set to 0 for an image scanner in which an overflow does not
occur.
Bit 1
Monochrome function (black and white)
This bit is set to 1 if the image scanner has the monochrome (black and
white) function. The bit is set to 0 if the image scanner does not have this
function.
Bit 2 Dither and half>tones
This bit is set to 1 if the image scanner has the dithering and halftones
functions. The bit is set to 0 if the image scanner does not have these
functions.
Bit 3 Multilevel (gray scale)
This bit is set to 1 if the image scanner has the multilevel (gray scale)
function. The bit is set to 0 if the image scanner does not have this
function.
Bit 4 Reserved (Bits 4 to 7 are reserved for JBMS)
Bit 5 Monochrome (RGB color)
This bit is set to 1 if the image scanner has the monochrome (black and
white) function. The bit is set to 0 if the image scanner does not have this
function.
Bit 6
Dithering and halftones (RGB color)
This bit is set to 1 if the image scanner has the dithering and halftones
functions. The bit is set to 0 if the image scanner does not have these
functions.
Bit 7 Multilevel (RGB color)
This bit is set to 1 if the image scanner has the multilevel (RGB color)
function. The bit is set to 0 if the image scanner does not have this
function.
4 $ 36
Description