Fujitsu M3096GX Instruction Manual page 62

c. Removable medium (RMB) : Byte 1
This scanner does not support RMB. This scanner returns B©0π.
d. Device type qualifier: Byte 1
This scanner does not support this field.
B©0000000π.
e. ISO version, ECMA version, ANSI approved version: Byte 2
Indicates the version number of the governing standard. This scanner returns
X©02π (SCSI>2).
f. Asynchronous event notification capability (AENC) : Byte 3
This scanner does not support this field, so it returns B©0π.
g. Response data format: Byte 3
Indicates the standard, and its version number, that governs the format of
inquiry data. This scanner returns B©0010π (SCSI>2).
h. Additional length (n>4) : Byte 4
Specifies the number of bytes, from byte 5 to the last byte. This value will not
change with the allocation length value specified in CDB. This scanner returns
X©5Bπ (the 91 bytes from byte 5 to byte 5F).
i. RelAdr, Wbus32, Wbus16: Byte 7
This scanner does not support RelAdr/ Wbus32/ Wbus16. This scanner returns
B©000π.
j. SYNC (synchronous transfer) : Byte 7
This scanner returns B©1π (™synchronous transfer supported∫ ).
k. Linked, cache, CMDQUE: Byte 7
This scanner does not support linked/cache/CMDQUE. This scanner returns
B©000π.
l. sftRst (Soft Reset) : Byte 7
This scanner performs Hardware Reset. This scanner returns B©0π.
m. Vendor identification: Bytes 8 to F
Indicates the vendor of the logical unit in ASCII code. The vendor name is left>
justified, with the blank filled with spaces
™FUJITSU∫ .
4 $ 30
This scanner always returns
(X©20π). This scanner returns