Fujitsu M3096GX Instruction Manual page 155

Example: Set up subwindows 0 and 1 (If it is necessary to set subwindows) in window 0
and 128. (M3093DE)
Document
Window 0 (front>side)
Subwindow 0
Subwindow 1
Initiator
SEND
(if necessary)
OBJECT POSITION
(Not required if ADF is not used)
SCAN (M3093DE)
READ command sequence
See item 4.7.3 for the READ command sequence.
(OBJECT POSITION)
(Not required if ADF is not used)
(Not required if ADF is used, because document is unloaded automatically.)
Document
Window 128 (back>side)
Subwindow 1
Subwindow 0
Target
Dither pattern download
Load document on ADF
Set simplex or duplex reading
Start scan/transfer
Unload document from ADF
4 $ 123