Commissioning And Operation - Kärcher K 5.86 M Operating Instructions Manual

The appliance may only be connected
to alternating current. The voltage must
correspond with the type plate on the
appliance.
The maximum tolerable mains imped-
ance at the electrical contact point (see
Technical Data) must not be exceeded.
For safety reasons, we recommend that
you operate the appliance only via a
earth-leakage circuit breaker (max.
30 mA).
Cleaning operations which produce oily
waste water, e.g. engine washes, un-
derbody washes, may only be carried
out using washing stations equipped
with an oil separator.
This appliance was designed to be used
with detergents which are supplied or
recommended by the manufacturer.
The use of other detergents or chemi-
cals may compromise the safety of the
appliance.
Safety Devices
Caution
Safety devices protect the user and must
not be modified or bypassed.
Power switch
The appliance switch prevents unintention-
al operation of the appliance.
Lock trigger gun
This lock locks the lever of the trigger gun
and prevents the inadvertent start of the ap-
pliance.
Commissioning and
operation
Description of the Appliance
When unpacking the product, make sure
that no accessories are missing and that
none of the package contents have been
damaged. If you detect any transport dam-
ages please contact your dealer.
Illustrations on Page 2
1 ON/OFF switch for appliance
2 Power cable with plug
3 High pressure connection
4 High pressure hose
5 Trigger gun
6 Lock trigger gun
7 Connection for water supply with filter
8 Coupling element for water connection
9 Detergent tank
10 Suction hose for detergent
11 Dosage regulator for detergent
12 Accessory mount, Handgun
13 Storage for high-pressure hose
14 Accessory mount, Spray lance
15 Transport handle
16 Spray lance with Vario Power nozzle
Special accessories
Special accessories expand the possibili-
ties of using your appliance. Please contact
your Kärcher dealer for further information.
Before Startup
Illustrations on Page 2
Illustration
Mount loose parts delivered with appliance
prior to start-up.
Illustration
Push the high pressure hose into the
trigger gun until it locks audibly.
Note: Make sure the connection nipple
is aligned correctly.
5
English