Front Cover And Maintenance Covers - MIMAKI JV5-130S Operation Manual

CHAPTER 2 Basic Use of Printer

Front cover and Maintenance covers

Opening/closing the front cover and maintenance covers
If you open any of the front cover and maintenance covers during printing, the carriage will stop for safety,
resulting in abortion of printing. In this case, restart the printer and computer by the procedure described
below:
STEPS:
1
Once any of the front cover and maintenance covers is opened during printing, the
printer displays the following message and stops printing.
2
Stop the data transmission from the computer.
Close the cover.
3
Press the [ENTER] key once.
4
The carriage will start moving.
The printer performs the same initial operation as is performed when the power is turned on.
2-6
Downloaded From ManualsPrinter.com Manuals
Do not open any of the front cover and maintenance covers during printing
operation.
Opening any cover during printing interrupts image printing, which can not be
resumed from the interrupted point.
Close a cover.
( Cover Open )
PRESS <ENT> KEY
∗Being Initialized∗
NOT POW-OFF !!
PLEASE WAIT
Names of Parts and Functions