Connecting The Power Cord And Usb Cable: I5800/I5850 Scanners - Kodak i5000 Series User Manual

Connecting the power cord
and USB cable: i5800/i5850
Scanner
2-4
After the drivers have been installed, connect the power cord and USB cable to
the scanner. Refer to the illustration below for making proper connections.
Make sure the power outlet is located within 1.52 meters (5 feet) of the
scanner and is easily accessible.
1. Select the appropriate AC power cord for your region from the supply of
power cords packed with your scanner.
2. Plug the output power cord into the power port on the scanner. Be sure it is
securely attached.
3. Plug the other end of the power cord into the wall outlet.
4. Attach the USB cable to the scanner USB port.
5. Attach the other end of the USB cable to the proper USB port on your PC.
A-61670 August 2014