Packing size (W x H x D)
Wired remote controller
Temperature sensor (Thermistor / 1EA)
Remote controller cable (1EA, 4core 15m)
Total 7EA (2 type)
Top cover plate
323 mm x 339 mm x 131 mm
Installing the unit
Deciding on where to install the unit
f Install the unit in indoor and do not install it outside. The unit is designed only for indoor.
f Direct heat can make the kit have some failures in operation.
f Choose locations that are dry and sunny, but not exposed to direct sunlight or strong winds.
f Choose location where pipes and cables can be easily connected to the indoor unit.
f Avoid locations where flammable elements and explosive chemicals are stored.
f Choose a specific wall which can withstand the weight of unit and an outside force.
Mounting the unit
1. Remove 2 bolts from the unit.
2. Open the top cover and install 4 screws on the wall.
3. Close the top cover and install 2 bolts again into the unit.