Enable The Syslog Server - NETGEAR WAC730 Reference Manual

ProSAFE Dual-Band Wireless AC Access Point WAC720 WAC730
3. Click the Reset Password button. The password is reset to the default password, which is
password.
4. Click the Apply button.
Your settings are saved.
To reset the password for a user account:

1. On the User Accounts page, in the lower part of the page, select a user from the
Existing Users menu.
2. Click Reset Password. The password is reset to the default password, which is password.
3. Click Apply to save your settings.
Note: If you want to modify a password, delete the user account, and then
recreate the user account with the password of your choice.
To delete a user account:

1. On the User Accounts page, in the lower part of the page, select a user from the
Existing Users menu.
2. Click the Delete button.
3. Click the Apply button.
Your settings are saved.

Enable the Syslog Server

You can enable the syslog option if your LAN includes a syslog server. If syslog is enabled,
the wireless access point sends its syslog files to the syslog server.
To enable a syslog server:

1. Select Configuration > System > Advanced > Syslog.
Management and Monitoring
60