Setting Up Anynet+
The following settings help set the Anynet+ functions.
TOOLS button to display Tools menu.
You can also display Anynet+ menu by selecting Tools → Anynet+(HDMI-CEC).
Anynet+(HDMI-CEC) → Off / On
To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
Anynet+ (HDMI-CEC) function is disabled, all the Anynet + related
operations are deactivated.
Auto Turn Off →
No / Yes
Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off
The active source on the TV remote must be set to TV to use the Anynet
If you set
Auto Turn Off to Yes, connected external devices are also turned off
when the TV is turned off. If an external device is still recording, it may or may not
Scanning and Switching between Anynet+ Devices
1. Press the TOOLS button. Press the ENTER E button to select
2. Press the ▲ or ▼ button to select Device List, then press the ENTER E button.
Anynet+ devices connected to the TV are listed. If you cannot find a device you
want, press the red button to scan for devices.
Only when you set
Anynet+ (HDMI-CEC) to On in the Setup menu, the Device List
3. Press the ▲ or ▼ button to select to a particular device and press the ENTER E
button. It is switched to the selected device.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.
The time required to scan for devices is determined by the number of connected devices.
When the device scan is complete, the number of devices found are not displayed.
Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to the TV
when the TV is on or under some conditions are not automatically displayed in the device list. Press the red button to search for the
If you have selected external input mode by pressing the
switch to an Anynet+ device by using the Device List.
SOURCE button, you cannot use the Anynet+ function. Make sure to
English - 35
Media Play (USB)
Auto Turn Off