Connecting and Preparing Your TV
AAA Batteries (2ea)
Ferrite Core (Power Cord, Headphone)
The ferrite core is used to shield the cable from interference. When connecting a cable,
open the ferrite core and clip it around the cable near the plug as shown in the figure.
Using the Stand-Base
Two or more people should carry the PDP. Never lay the PDP on the floor
because of possible damage to the screen. Always keep the PDP upright.
The PDP can rotate 20 degrees in right and left directions.
Assembling the Cables
Enclose the cables in the Holder-Wire Cable so that the cables are not visible through the
Ferrite Core for
English - 4
(Refer to page 40)
Ferrite Core fo
-20° ~ 20°