Setting Up Anynet; Scanning And Switching Between Anynet + Devices - Samsung PS42B450 User Manual

Setting Up Anynet+

Anynet+ is a function that enables you to control all connected Samsung devices
that support Anynet+ with your Samsung TV's remote.
Press the TOOLS button to display TOOLS menu.
T
You can also display Anynet+ menu by selecting TOOLS → Anynet + (HDMI-CEC).
Setup
❑
You can set the environment for using Anynet + .
Anynet+(HDMI-CEC) → Off / On

To use the Anynet+ Function, Anynet + (HDMI-CEC) must be set to On.
When the Anynet + (HDMI-CEC) function is disabled, all the Anynet + related
N
operations are deactivated.
Auto Turn Off → No / Yes

Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off
The active source on the TV remote must be set to TV to use the Anynet + function.
N
If you set Auto Turn Off to Yes, connected external devices are also turned off when
N
the TV is turned off. If an external device is still recording, it may or may not turn off.
Searching Connections

Searches the all connected devices.
When searching devices completes, the connected devices are listed in the Anynet +
menu.

Scanning and Switching between Anynet + Devices

1. Press the TOOLS button. Press the ENTER E button to select
Anynet+ (HDMI-CEC).
. Press the ▲ or ▼ button to select Select Device, then press the ENTER E button.
Anynet+ devices connected to the TV are listed. If you cannot find a device you want,
N
press the red button to scan for devices.
Only when you set Anynet+ (HDMI-CEC) to On in the Setup menu, the Device List
N
menu appears.
. Press the ▲ or ▼ button to select to a particular device and press the ENTER E button.
It is switched to the selected device.
4. If you cannot find a device you want, press the ▲ or ▼ button to select Searching
Connections, then press the ENTER E button.
5. The meassage Configuring Anynet+ connection is displayed. When searching
devices completes, the connected devices are listed in the Anynet+ menu
Switching to the selected devices may take up to 2 minutes. You cannot cancel the
N
operation during the switching operation.
The time required to scan for devices is determined by the number of connected
N
devices.
When the device scan is complete, the number of devices found are not displayed.
N
Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to the TV
N
when the TV is on or under some conditions are not automatically displayed in the device list. Press the red button to search for the
connected device.
If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to
N
switch to an Anynet+ device by using the Device List.
BN68-01937A-Eng.indb 26
English - 
T V Input
Source List : TV
Edit Name
Anynet+ (HDMI-CEC)
Move Enter Return
TV P 1
View TV
Select Device
Record
---- MENU
---- INFO
Receiver :Off
Setup
Move
Enter
Return
Setup
Anynet+ (HDMI-CEC) : On
Auto Turn Off : Yes
Searching Connections
Move Enter Return
TV P 1
View TV
Select Device
Record
---- MENU
---- INFO
Receiver :Off
Setup
Move Enter
Return
Setup
Anynet+ (HDMI-CEC) : On
Auto Turn Off : Yes
Searching Connections
Move Enter Return
Continued...
2009-03-17 오전 11:24:50