The Anynet + menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet + Menu
(*recorder) Reserve Recording
Stop Recording: (*recorder)
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it
will be represented as (*device_name).
TV Remote Control Buttons Available in Anynet+ Mode
After switching to the device, when the
menu of the corresponding device is
displayed on the screen.
Anynet + Device
After switching to the device, while
playing a file
After switching to the device, when you
are watching a TV programme
When Receiver is activated
The Anynet+ function only works when the active source on the TV remote control is set to TV.
button works only while in the recordable state.
You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote control.
The TV remote control may not work under certain conditions. In this case, reselect the Anynet+ device.
The Anynet+ functions do not operate with other manufacturers' products.
operations may differ depending on the device.
You can make a recording of a TV programme using a Samsung recorder.
1. Press the TOOLS button. Press the ENTER E button to select
2. Press the ▲ or ▼ button to select Record: (device_name), then press the ENTER E
button. Recording begins.
When there is more than one recording device
When multiple recording devices are connected, the recording devices are listed.
Press the ▲ or ▼ button to select a recording device and press the ENTER E
button. Recording begins.
When the recording device is not displayed
Select Device List and press the red button to search devices.
You can record the source streams by selecting
button will record whatever you are currently watching. If you are watching video from another device, the video
from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna to
a recording device, refer to the recording device's users manual.
Anynet+ mode changes to TV broadcast mode.
Shows the Anynet+ device list.
Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the
DVD recorder will appear.
Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the play menu
of the DVD recorder will appear.
Starts recording immediately using the recorder. (This is only available for devices that support the
Enables reserving a recording for the recorder. (This is only available for devices that support the
recording reservation function.)
Sound is played through the receiver.
▲/▼/◄/►/ENTER E buttons
Colour buttons / EXIT button
M MUTE button
English - 36
(Backward search) /