Source List / Edit Name
Use to select TV or other external input sources such as DVD players or Cable Box /
Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of
, AV1, AV2, Component1, Component2, PC, HDMI1, HDMI2/DVI, HDMI3,
You can choose only those external devices that are connected to the TV. In the
Source List, connected inputs will be highlighted and sorted to the top. Inputs that
are not connected will be sorted to the bottom.
always stays activated.
Using the Colour buttons on the remote with the Source list
(Refresh): Refreshes the connecting external devices.
TOOLS (Tools): Displays the Edit Name and Information menus.
SOURCE button on the remote control to view an external signal source.
TV mode can be selected by pressing the TV button, number buttons (0~9), and the
P < / > button on the remote control.
/ DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI / DVI PC / TV / IPTV /
Blu-ray / HD DVD / DMA
You can name the device connected to the input jacks to make your input source selection easier.
When a PC with a resolution of
mode to PC in the Edit Name of the Input mode.
When connecting an HDMI/DVI cable to the
Edit Name of the Input mode. In this case, a separate sound connection is required.
1920x1080@60Hz is connected to the HDMI IN 2 (DVI) port, you should set the HDMI2/DVI
HDMI IN 2(DVI) port, you should set the HDMI2/DVI mode to DVI or DVI PC in the
English - 25