Panasonic WV-SF448 Operating Instructions Manual page 70

10 Configure the basic settings of the camera [Basic]
Note
•
When "FTP error" is selected for "Save trigger", images will be saved with the image capture size
selected on the [FTP img. trans.] tab of the "Network" page.
•
When "H.264(1)" or "H.264(2)" is selected for "Recording format", select the image capture size for "H.
264 recording" - "Image capture size" on the [SD memory card] tab.
•
When "Alarm input" is selected for "Save trigger", images will be saved with the image capture size
selected on the [Alarm] tab of the "Alarm" page.
H.264 recording
This setting is available only when "H.264(1)" or "H.264(2)" is selected for "Recording format" of the SD memory
card.
When the [Set] button is clicked after selecting "H.264(1)" or "H.264(2)" in "Recording format", "H.264
recording" is displayed on the lower part of the screen.
[Image capture size]
Select the image capture size from the following.
The options of "Recording format" vary depending on "Image capture mode" on the [JPEG/H.264] tab of the
"Image/Audio" page.
Image capture
mode type
1 Monitor (Max. 30
fps)
70 Operating Instructions
Image capture mode
2M Panorama [16:9]
2M Double Panorama [16:9]
1M Panorama [16:9]
1M Double Panorama [16:9]
1.3M Fisheye [4:3]
1.3M Quad PTZ [4:3]
1.3M Single PTZ [4:3]
Recording format
H.264(1)
H.264(2)
Image capture size
1920x1080
*2
640x360
320x180
1280x720
*2
640x360
320x180
1280x960
*2
VGA
QVGA