K-array KMT21 User Manual page 17

KMT21 / KMT21 Mark I
DELAY
CoNfIGURATIoN
Warning. If you are using speakers with selectable impedance, pay
attention to set the value indicated in the Configuration page!
The Delay page allows users to independently set the
delays for the two output channels driving the subwoofer
and the speakers connected to the Speaker Out (up to
3.5 mt) and for Channel 1 and Channel 2 input channels
(up to 114 mt).
Pressing on a delay value, users can set the delay in
milliseconds or meters. Press the OK button to return to
the Delay page.
Before connecting one or more speakers to the Speaker
Out, follow the instructions below.
Warning. Failure to follow these instructions
could result in serious damage to the
speakers connected to the amplifier!
Go to the Configuration page and press the SETUP
button. Insert the model and the number of speakers
connected to the Speaker Out.
Press the NEXT button on the top right corner.
Press the APPLY button and the DSP will automatically
adjust the output gain and the crossover to match the
requirement for the speakers connected.
Ver. 1.3
17