Table of Contents
Advertisement
• The station hears the door chime and communicates with
and listens to a Door Station.
off
When a station is set to OFF:
• You can communicate from an Indoor Remote Station but
you cannot communicate from an Outdoor Remote Station.
• Other Remote Stations cannot listen to the room.
• The room cannot receive music or intercom-related audio.
• The room cannot be monitored.
• The station does not hear the door chime and cannot talk
and listen to the Door Station.
monitor
When a station is set to Monitor:
• Any station set to Radio/INT can continually hear all sound
and activity in the room.
• You can communicate with other room stations.
• The room cannot hear the door chime.
• You can talk to the Door Station, but will not be able to listen
to it.
• The room cannot receive music.
intercom operation
talk
Talk allows users to talk to all stations with selector switches set
to Intercom or Radio/INT.
To initiate a Talk/Listen session, press TALK and begin talking.
You can hear remote users if you press the LISTEN button or if
they press their TALK button.
listen
Press LISTEN to listen to all stations set to Intercom or Radio/
INT.
door talk/listen
• Press TALK and LISTEN simultaneously to enter Door
Talk mode. This allows you to talk to the Door Stations. All
other stations set to Intercom or Radio/INT can hear the
conversation.
• Release the TALK and LISTEN buttons to listen to the Door
Station. The Listen mode is active for a total of 25 seconds
after you release the TALK and LISTEN buttons. You may
talk again at any time by pressing TALK and LISTEN. Each
time the buttons are released, you can listen for another 25
seconds.
• Door Talk mode is suspended at the end of the 25 second
listening period or if you press either the TALK button or the
LISTEN button individually.
monitor
All stations set to Radio/INT on the Master Station can continually
hear the sound and activity from a station set to Monitor.
models nm
security/home automation (optional)
This optional function can control another system that is properly
connected to the NM100. For example, it may control a door
release mechanism, turn on the lights, set off an alarm, etc.
This function is available from the Master Station and Remote
Stations (NRS103WH and NRS104WH). It is not available from
an outdoor remote station.
To initiate this feature from a room station:
1. Simultaneously press VOLUME UP and VOLUME DOWN
and hold for at least 4 seconds. After 4 seconds, this feature
is active for as long as the buttons are pressed.
2. Release the buttons to deactivate the feature.
master station operation
radio operation
1. Press POWER to turn on music.
2. Select either FM or AM as the music source. See Master
Station
Settings/Music
instructions.
3. Use TUNE UP or TUNE DOWN to select a station, or press
PRESET to select a preset station.
remote station operation 4-wire (m&s systems
retrofit)
Remote Station Functions
• Door Talk/Listen
Press TALK and LISTEN simultaneously to talk to the Door
Stations. Release both buttons to listen.
• Listen
Listen to all stations set to Intercom or Radio/INT.
100
300
• nc
Page
Settings/Music
Source
for
Advertisement
Table of Contents
