System Settings; Door Station; Clock Settings; Radio Settings - NuTone NC300 series Operating Manual

door station

The Door Station is an exterior intercom speaker and door
chime pushbutton installed at home entrances. The NM100
system supports up to 3 door stations. The door station allows
for communications from within the house to visitors. Any station
with its Intercom Selector Switches set to Intercom or Radio/INT
can communicate with the Door Station.

system settings

clock settings

You can set two clock functions:
• Normal—Displays the normal time of day.
• Music Auto On/Off—Sets the times to automatically turn the
last music source on and then off.
models nm
To change clock settings:
1. Press TIME. The hour field for Normal Time blinks, and SET
TIME appears on the display.
2. Press VOLUME UP or VOLUME DOWN to change the hour.
An A or P indicates AM or PM, respectively.
3. Press TIME. The minute field blinks. Use the VOLUME
buttons to change the minutes.
4. Press TIME to continue through the settings: Music Auto On,
hour and minutes and Music Auto Off, hour and minutes.
5. After you have entered Music Auto Off minutes, press TIME
to return to Normal Time display.
Note: You can enable or disable the AUTO function. The
word "Auto" will appear on the display when Auto Function is
on. See Music Settings/Auto On/Off.
music settings
music source
You can select from four music sources:
• AUX—Any audio source you connect, such as an external
CD player or a stereo system.
• AM radio
• FM radio
• CD player (NC300WH CD Player). This source can also be
used to hook up an external audio device if the system does
not include an NC300 CD player. For CD functionality, see
Master Station Operation/CD Player Operation.
To select a music source:
1. Press POWER to turn on music.
2. Press SOURCE repeatedly to cycle through AUX, AM, FM,
and CD until you reach the music source you prefer.
music auto on/off
You can set the system to turn music on automatically at a
predetermined time and to turn the music off automatically at a
predetermined time.
1. Set the Auto On/Off times as described under Clock
Settings.
2. Press the AUTO button to toggle between On and Off. When
the Auto function is on, AUTO appears on the display.

radio settings

You can tune in FM or AM radio stations, and can set up to 8
presets on each band.
tune the radio
To tune a radio station:
1. Press POWER to turn on the music.
2. Select FM or AM. See Music Settings/Music Source for
instructions.
3. Use TUNE UP or TUNE DOWN to find a station. If you press
and release, within 1 second, TUNE UP or TUNE DOWN,
the tuner goes into Seek Mode and finds the next station
with a strong signal. If you press and hold TUNE UP or
TUNE DOWN, the tuner goes into Scan Mode and scans all
frequencies until you release the button.
100 300
• nc
Page