Panasonic KX-MB2085CX Operating Instructions Manual page 65

Feature/Code
Setting the fax to email
address
MBNM4NM5NM2N
(KX-MB2090 only)
Erasing all received fax
memory
MBNM4NM5NM8N
Resetting fax features to their
default settings
MBNM4NM5NM9N
Selection
If you wish to transfer a received fax document to desired email address,
activate this feature.
M0N "OFF" (default): Deactivates this feature.
M1N "ON": If you set the email destinations beforehand (page 73), the received
fax document will be automatically transferred as an email attachment to the
desired address.
M0N "NO" (default)
M1N "YES"
R Disconnect the following cables before activating this feature.
– Telephone line cord
– USB cable
– LAN cable (KX-MB2090 only)
To erase all received fax:
1. MMENUN A MBNM4NM5NM8N
2. Press M1N to select "YES". A MSETN A MSETN A MMENUN
M0N "NO" (default)
M1N "YES"
To reset the fax features:
1. MMENUN A MBNM4NM5NM9N
2. Press M1N to select "YES". A MSETN A MSETN A MMENUN
Note:
R If you select "YES", the unit will automatically print out any received fax
documents that have been stored into memory:
– PC fax setting (feature #442 on page 64).
– Fax preview (feature #448 on page 51) (KX-MB2090 only).
9. Programmable Features
65