Panasonic KX-MB2085CX Operating Instructions Manual page 25

2. Connect the unit to a computer with the USB cable
(A), then click [Next].
R If the unit is connected to your computer, the
model name will be automatically detected.
R You can change the name of the unit if necessary.
3. Click [Install], then follow the on-screen instructions.
R The files will be copied to your computer.
For LAN connection (KX-MB2090 only):
1. [Connect via the Network.] A [Next]
R The [Select a Network Device] dialogue box will
appear.
2. Check [Select from the search list] and select the
unit from the list.
R If the name of the desired unit is not displayed on
the list, and the IP address for the unit has been
assigned, check [Direct input] and enter the IP
address.
3. [Next]
R You can change the name of the unit if necessary.
4. Click [Install], then follow the on-screen instructions.
R The files will be copied to your computer.
Important notice
When installing using a USB cable connection, a
message may appear during the software installation.
This is normal and the software will not cause any
difficulties with your operating system. You can
continue the installation with no problem. This kind of
message is displayed:
R For Windows XP users
"The software you are installing for this hardware
has not passed Windows Logo testing to verify its
compatibility with Windows XP."
R For Windows Vista/Windows 7/Windows 8
users
"Would you like to install this device software?"
To view or install the operating instructions data
1. Start Windows and insert the supplied CD-ROM into
your CD-ROM drive.
2. Click [Operating Instructions], then follow the
on-screen instructions to view or install the operating
instructions in PDF format.
® ®
R Adobe Reader
instructions.
A
is required to view the operating
Note:
R If you install the operating instructions, you can view
it anytime by clicking [Help] on the Multi-Function
Station launcher.
To use another unit with the computer
You need to add the printer driver for each unit, as
follows.
1. Start Windows and insert the supplied CD-ROM into
your CD-ROM drive.
2. [Modify] A [Add Multi-Function Station Driver].
Then follow the on-screen instructions.
Note:
R You cannot connect more than one unit to the same
computer at the same time (USB connection only).
To modify the software (To add or uninstall each
component)
You can select the components to install or uninstall
anytime after the installation.
You must be logged in as an administrator in order to
modify Multi-Function Station.
1. Start Windows and insert the supplied CD-ROM into
your CD-ROM drive.
2. [Modify] A [Modify Utilities]. Then follow the
on-screen instructions.
To uninstall the software
You must be logged in as an administrator in order to
uninstall Multi-Function Station.
[Start] A [All Programs] A [Panasonic] A the
unit's name A [Uninstall]. Then follow the on-screen
instructions.
2. Preparation
25