Panasonic KX-MB2085CX Operating Instructions Manual page 35

2. Place the next document on the scanner glass
and press MSETN. Repeat this until you have
scanned all pages, and then press MSTARTN.
R The unit will start copying.
When using the automatic document feeder:
MSTARTN
8
After you finish copying, press MSTOPN to reset this
feature.
Example: Making 2 copies of a 4-page original
document
3
2
1
4
3
2
1
Collated pages
Note:
R The unit will store the documents into memory at a
reduced resolution while collating the copies. If the
memory becomes full while storing, the unit will only
print out the stored pages.
R You can hold the previous collate setting (feature
#469 on page 66).
Proof set feature
To make 1 set of a collated copy first, press MCN or MDN
repeatedly to display "PROOF SET" (step 4 on
"5.2.2 Collate copy", page 34). The unit will make 1 set
of a collated copy and stop temporarily so you can check
whether the copy was made as you expected. If the copy
is correct, press MSTARTN to continue copying.
If the copy is not correct, press MSTOPN and start again
from the beginning.
5.2.3 Quick ID copy feature / Image repeat
feature (Scanner glass only)
Quick ID copy feature: To copy 2-sided documents
onto one page.
Image repeat feature: To copy a single document
repeatedly onto one page.
Note:
R The copied documents will not be reduced to fit the
recording paper, and useful for copying small sized
documents such as business cards.
1
Set the original (page 19).
R To make a landscape copy, set the original in
landscape direction. To make a portrait copy, set
the original in portrait direction.
4
4
4
3
3
2
2
1
1
Uncollated pages
R The scanning area changes according to the
selected setting in step 4. See the following table
for details. The shaded area will be scanned.
2
Press MPAGE LAYOUTN repeatedly to select "PAGE
LAYOUT".
3
Press MCN or MDN repeatedly to select "QUIK ID
COPY" or "IMAGE REPEAT". A MSETN
4
Press MCN or MDN repeatedly to select the number of
original documents from "2 in 1", "4 in 1" or "8
in 1". A MSETN
R For quick ID copy feature, go to the next step.
R For image repeat feature, go to step 6.
5
Press MCN or MDN repeatedly to select the page layout
from "LANDSCAPE" or "PORTRAIT". A MSETN
6
If necessary, enter the number of copies (up to 99).
7
Quick ID copy feature:
1. MSTARTN
R The unit will scan 1 page.
2. Place the next document on the scanner glass
and press MSETN. Repeat this until all the
documents are scanned.
R The unit will start copying.
R You can press MSTARTN anytime to start
copying.
Image repeat feature:
MSTARTN
8
After you finish copying, press MSTOPN to reset this
feature.
Note:
R You can save the previous page layout setting
(feature #467 on page 66).
For quick ID copy feature
Original document
"2 in 1"
5. Copier
Page layout
"LANDSCAPE"
"PORTRAIT"
35