x Connecting to a Macintosh or compatible
computer
Use the supplied exclusive Power Mac G3/G4 adapter.
2
R
AC IN
Power Mac G3/G4
exclusive Power
Mac G3/G4 adapter
(supplied)*
to video output
* Connect the supplied adapter to the computer before connecting the
cable. This adapter is compatible only with Power Mac G3/G4
computers that have 3 rows of pins. If you connect to the other version
of Macintosh series computer that has 2 rows of pins, you will need a
different adapter (not supplied).
x Connecting to the 5 BNC connectors
2
R
AC IN
to R/G/B input
Refer to the preceding
examples to connect to your
computer.
* Connect the cables from left to right in the following order: Red-Green-
Blue-HD-VD.
G
B
HD
VD
1
to HD15
video signal cable
(supplied)
G
B
HD
VD
1
to HD/VD
input
video signal cable
(SMF-400, not supplied)*
Note
Plug & Play (DDC) does not apply to the 5 BNC connectors. If you want
to use Plug & Play, connect your computer to the connector using the
supplied video signal cable.
Step 2: Connect the power cord
With the monitor and computer switched off, first connect the
power cord to the monitor, then connect it to a power outlet.
to AC IN
to a power outlet
power cord (supplied)
Step 3: Turn on the monitor and
computer
First turn on the monitor, then turn on the computer.
The installation of your monitor is complete.
If necessary, use the monitor's controls to adjust the picture.
AC IN
GB
(continued)
7