How To Connect The Ac Power Cord; How To Connect A Cable To A Bnc Connector - Sony Trinitron PVM-14N1A Owner's Manual

How to Connect the AC Power Cord

Connect the AC power cord (supplied) to the ~AC IN
connector and to a wall outlet.

How to Connect a Cable to a BNC Connector

Connect the coaxial cable with the BNC connectors to
the BNC connectors on the rear panel as illustrated
below.
Insert the connector into the BNC
connector on the rear panel,
matching the slit and pin, and turn
the cable BNC connector clockwise
to secure the BNC connector of a
coaxial cable.
Video signal
Color system
NTSC, PAL, SECAM, NTSC
Resolution 500 TV lines
Frequency response
LINE
6 MHz±3dB (Y signal)
RGB 6 MHz±3dB
Picture performance
Normal scan 7 % over scan of CRT effective
screen area
H. linearity
Less than 8.0 % (typical)
V. linearity Less than 7.0 % (typical)
Color temperature 6,500 K
Inputs
LINE A/B
Y/C IN 4-pin mini-DIN(X2)
See
the pin assignment on the next
page.
VIDEO IN
BNC connector (X2), 1Vp-p +3 dB,
-6 dB, sync negative
AUDIO IN
Phono jack
than 47 kilo-ohms
RGB (PVM-l4N2A/l4N2E/l4N2U/20N2A/20N2E/
20N2U only)
BNC connector (X3)
R/G/B
0.7 Vp-p +3 dB, -6 dB
Sync on green: 0.3 Vp-p, negative,
Automatic 75 ohms termination
Phono jack (xl), -5 dBu a ), more
AUDIO IN
than 47 kilo-ohms
EXT SYNC BNC connector (Xl)
4 Vp-p +3 dB, -6 dB, sync negative
REMOTE (PVM-l4N2A/l4N2E/l4N2U/20N2A/
20N2E/20N2U only)
Phono jack (Xl)
Open: currently selected input
signal
Low state (GND): input signal
selected prior to the current
input signal
0 dBu = 0.775 Vr.m.s.
a)
dBu a ), more
(X2), -5
13