Connections; How To Connect The Ac Power Cord; How To Connect A Cable To A Bnc Connector - Sony Trinitron PVM-14L1MDE Instructions For Use Manual

Functions
16:9 mode
You can precisely monitor a signal whose aspect ratio
is 16:9, in addition to a 4:3 signal.
Note
With a 16:9 mode display, red, blue and green
scanning lines can be seen at the upper edge of the
screen, but this is due to internal operations of the unit
itself.
On-screen menus
You can set monitor operation settings by using the
on-screen menus.
Side covers
The monitor can be covered with side covers. The side
covers that protect the ventilation holes from splashes
(of medicines, etc.) as much as possible.
Options
EIA 19-inch rack mount bracket available
The monitor can be mounted on an EIA-standard
19-inch rack, using the following mounting brackets or
slide rails.
MB-502C (Outside Europe, use the MB-502B)
For details on mounting the monitor on the rack, refer to the
user's manual of the mounting bracket or slide rail.

Connections

How to Connect the AC Power
Cord
Plug the AC power cord into the AC IN socket.
How to Connect a Cable to a
BNC Connector
Connect the coaxial cable with the BNC plugs to the
BNC connectors on the rear panel as illustrated below.
Insert the BNC plug into the connector on
the rear panel, matching the slit and pin,
and turn the BNC clockwise to secure the
connection.
5
(GB)