KDK M56SR Operating And Installation Instructions page 10

4 Install the Hook Set (For Instruction B only).
4
安裝吊鉤組 (只限於指示 B)。
Suspension Bolt /
懸掛螺栓
Plain Washer /
普通墊圈
Spring Washer /
彈簧墊圈
Hexa Nut /
六角形螺帽
Install to Ceiling / 安裝至天花板
B)
Install to Ceiling.
1
1
安裝至天花板。
i)
Pulley / 滑輪
1st step / 步驟一
Take out Pulley Set from Parts Set, after that
cross it to Pipe.
從零件組取出滑輪組件，隨後將其轉到導管上。
i)
Hook Set /
吊鉤組
1st step / 步驟一
Place the Pulley Set to the Hook Set as shown
in the picture.
如圖所示將滑輪組件置入吊鉤組。
Ensure Hook Set can afford more than 10 times the Ceiling Fan weight.
Can cause injury if Blades drops.
確定吊鉤組可以承受超過吊扇的 10 倍重量。
若扇翼掉落會導致受傷。
Ensure Ceiling Fan is not tilted so that the Blade does not touch the ceiling during installation.
Can cause unstable air fl ow and effect the Ceiling Fan to wobble.
确保吊扇不傾斜，使扇翼在安裝過程中不触及天花板。
可以導致不穩定氣流和吊扇搖晃。
M56SR_EN-CS.indd 10 M56SR_EN-CS.indd 10
Carl Bolt /
卡爾螺栓
ii)
Pulley Set /
滑輪組件
2nd step / 步驟二
Place the Pulley Set to the Hook Set as shown in the picture.
Make sure the Fan maintain straight to avoid the Blade from touching the
ceiling during installation.
如圖所示將滑輪組件置入吊鉤組。
請確保風扇保持筆直以避免扇翼在安裝過程中觸碰天花板。
ALTERNATIVE METHOD / 其他方式
ii)
2nd step / 步驟二
Incline Pulley Set and install Ceiling Fan.
Make sure the Fan maintain straight to avoid the Blade from touching the
ceiling during installation.
使滑輪組件傾斜，然後安裝吊扇。
請確保風扇保持筆直以避免扇翼在安裝過程中觸碰天花板。
Suspension Bolt /
懸掛螺栓
Suspension Bolt /
懸掛螺栓
Hook Set /
吊鉤組
Pulley /
滑輪
Hook Set /
吊鉤組
WARNING / 警告
CAUTION / 注意
10
Suspension Bolt /
Carl Bolt /
懸掛螺栓
卡爾螺栓
1/6/2011 6:32:25 PM 1/6/2011 6:32:25 PM