Updating The Phone Firmware - Gigaset C530HX Manual

DNS-Server:
Save:
It is also possible to make the settings via the Web configurator.
Display current IP address:

Updating the phone firmware

(only on a Gigaset GO-Box 100 or other Gigaset-IP base)
The firmware update is downloaded directly from the Internet by default. The relevant web page
is preconfigured in your phone.
The phone is connected to the Internet (i.e. connected to a router).
The phone is in idle status i.e. no calls are being made, there is no internal connection
between registered handsets and the menu is not open on any handset.
Starting the firmware update manually
¤
. . . use
OK . . . use
connection to the configuration server
The firmware update can take up to 6 minutes, depending on the quality of your DSL
connection.
When updating from the Internet, checks are made to ensure that no newer version of
the firmware exists. If this is not the case, the operation is terminated and a message is
issued to that effect.
¤
DNS-Server
preferred DNS server
The DNS server (Domain Name System) converts the symbolic
name of a server (DNS name) into the public IP address for the
server when the connection is made. You can specify your router's
IP address here. The router forwards phone address requests to its
DNS server.
¤
Save
Press the Paging key on the base station
to select Settings
to enter the system PIN
Availability and operation of the functions
may differ on your telephone.
. . . use to enter the IP address of the
OK System
OK . . . the telephone establishes an Internet
Yes
System
Firmware-Update
45