System - Gigaset C530HX Manual

System

The following settings can be set via the menu on a registered handset or using the web
configurator of the telephone/router.
Refer to the relevant documentation for which settings can be configured on your base/router.
Setting the date and time manually
(depending on the base)
To ensure you have the correct time for incoming calls and to use the alarm clock and calendar,
for example, the date and time must be set.
The address of a time server in the Internet is stored in the phone/router. The date and
time are taken from this time server provided the phone/router is connected to the
Internet and synchronisation with the time server is activated. Manual settings are
overwritten in this case.
If the date and time have not yet been set on the handset, the display key Time appears.
¤
Press the display key Time
or
¤
. . . use
Set the date:
Set the time:
Save settings:
Own area code
Your area code (international and local area code) must be saved
on the phone before you can transfer phone numbers (e.g. in
vCards).
Some of these numbers are already preset.
¤
. . . use
Telephony
(pre-)set area code
Edit the number:
¤
. . . use to select/switch entry field
change entry position
use to enter digit
to select Settings
¤
Date: . . . use
e. g.
¤
Time
format
e. g.
¤
Save
to select Settings
OK Area Codes
. . . delete digit if desired
Save
Availability and operation of the functions
may differ on your telephone.
OK Date/Time
to enter the day, month and year in 8-digit format
. . . use to enter hours and minutes in 4-digit
for 07:15
OK
OK Check
. . . use to
. . .
OK . . . then
for 14/01/2016
Example
Area Codes
International code:
00 - 49
Local area code:
0 - [8 ]
System
Save
43