Requirements; Identifying Phone Model; Phone Firmware; Dhcp Server - Gigaset N720 Manual

Hide thumbs Also See for N720:

Table of Contents

Requirements

To start and successfully complete registration of your Gigaset phone you need to know which

phone model you will setup.

From the back of each Gigaset phone there are exact model information that you should check.

Although different phone models can have exactly the same requirements and installation

procedure, phone models can also have significantly different requirements and installation

procedure, so that ignorance of your own model may result in the inability to successfully set up

your phone.

Make sure that your phone is loaded with appropriate firmware version, 70.110.00.000.00.

To find out the firmware version of your Gigaset phone model open a new browser window and

enter your phone IP address in order to access the phone web administration interface login

screen. Example: http://192.168.1.22.

factory default login password is: admin.

Fully configured and operational DHCP server.

4.1.4.0

In order to find out the PBXware version:

Navigate to Settings: About.

On the top of About page is a code similar to this one PBXware Edition: Business, Release:

4.1.4.0

(387597b7), Running: 1.8.32.1-gc-b47edc45, PBXware Proxy v4.1.4 (62b7bcd),

API: 4.1, libmemcached version: 1.0.14, where Release denotes the exact version of your

PBXware.

This chapter describes how to install and connect the phone to the electrical power and data

network as well as how to apply factory settings.

The following topics are covered:

Power adapter

Power over Ethernet (PoE)

Table of Contents