Canon ir2016 User Manual page 52

1
1-22
Main Power and Control Panel Power
Downloaded from ManualsPrinter.com Manuals
If the message <ENTER DEPT. ID> appears:
ENTER DEPT.ID
Enter the Department ID using the numeric keys, and press [OK].
ENTER DEPT.ID
1234567
Enter the password.
DEPT.ID PASSWORD
*******
NOTE
•
If the Department ID Management is set to <ON>, the message <ENTER DEPT.
ID> appears. For details about entering the Department ID and password, see
"After Turning the Power On," in the Reference Guide.
•
<DEPT. ID PASSWORD> is displayed even if the password has not been set. In
this case, press [OK] to enter the Standby mode.
•
For details about the Department ID Management, see "Department ID
Management," in the Reference Guide.