Get Ready For Flying; Propeller Installation; Power On - Idea-fly IFLY-4 User Manual

5. Get Ready For Flying

READ
THIS SECTION COMPLETELY BEFORE ATTEMPTING YOUR FIRST FLIGHT
It is recommended that before you commence your first flight, you should check the rotation of
all the motors and the direction and security of the propellers.
5.1

Propeller Installation

5.2

Power ON

1. Unfold the IFLY-4 and position it in a stable level horizontal position.
2. Set your radio transmitter THROTTLE to the LOWEST position.
3. Switch ON your radio transmitter.
4. Install the flight battery and plug into the IFLY-4.
5. Reset the IFLY-C4 Flight Control IMU sensor (see section 2.3)
6. ARM the IFLY-4. (When you first power up, the IFLY-4 will default to DIS-ARM mode for
safety.)
7. Your IFLY-4 is ready to fly!
8. For your first flight, keep the IFLY-4 to a height of less than 1m to check out your controls
Motor position #1 and #3 – Clockwise rotating propellers
Motor position #2 and #4 – Anti-clockwise rotating propellers
If any of the motors are found to be rotating in the wrong
direction, you can change it by swapping any two wires going
from the motor into the ESC.