Ifly-4 Radio Transmitter Configuration (Recommended) - Idea-fly IFLY-4 User Manual

3. IFLY-4 Radio Transmitter Configuration (Recommended)

The recommended method for setting and configuring the IFLY-4 is by connecting to the
IdeaFlyTools software on a computer. If you have not already done so, pls go to Section 3.0 to
install the IdeaFlyTools software onto the Windows PC.
An alternative method is shown in section 1.3.
SAFETY WARNING – REMOVE ALL PROPELLERS FROM THE IFLY-4 DURING SETUP
3.1 Using a standard mini USB cable (not supplied), connect IFLY-C4 Flight Controller to a
computer. The IFLY-C4 mini USB port can be found on the side of the unit.
3.2 RUN IdeaFlyTools on the computer.
3.3 Switch ON your radio transmitter.
3.4 Install the flight battery and plug into the IFLY-4.
3.5 You should be presented with the following screen on your computer;
3.6 Click the 'joystick' tab to calibrate your transmitter.