Rf Test Mode - Motorola ASTRO SPECTRA Service Manual

Performance Checks: Test Mode
Display Name
Encryption Firmware
Encryption Type 1
Encryption Type 2
Control Head Version
Auxiliary Control Head
Siren Version
VRS Version Number
Model Number
Serial Number
ROM Size
FLASHcode
Note : All displays are temporary and will expire without any user
4. Pressing the Mode rocker will cause the displays to stop. The test mode menu, CH TEST , will
be displayed.
5. Pressing the Home button will cause the displays to stop. The RF test mode will be entered.
The display will show 1 CSQ , indicating test frequency 1, Carrier SQuelch mode.
6. Go to the RF Test Mode section.
5.3.2

RF Test Mode

A special routine, called RF TEST MODE or air test, has been incorporated in the radio.
1. Enter the RF test mode by pressing the Home button when the test mode menu RF
TEST is displayed. Use the Mode rocker to cause the radio to display the test mode
menu, RF TEST , if the display reads CH TEST.
6881076C20-E
Table 5-1. Test-Mode Displays (Continued)
Firmware version for encryption
Type of encryption being used
Type of encryption being used
Control head firmware version number
Firmware version for the auxiliary control
head
Firmware version for the siren
Firmware version for the VRS
The radio's model number, as
programmed in the codeplug
The radio's serial number, as programmed
in the codeplug
Memory capacity of the flash port
The FLASHcodes, as programmed as a
part of the radio's codeplug
intervention. If the information is longer than the physical length
of the control head display, it will wrap around to the next display.
After the last display, RF TEST will be displayed.
Description Appears
When the
radio is secure
equipped
When the
radio is secure
equipped
When the
radio is secure
equipped
Always
When an
auxiliary
control head is
present
When a siren
is present
When VRS is
present
Always
Always
Always
Always
February 3, 2003
5-3