Encryption: Erase a Key
7.2.2
Models W4, W5, W7, and W9
To load an encryption key into a Model W4, W5, W7, or W9 radio:
7.3
Erase a Key
This feature allows you to select any one, or all, of the encryption keys to erase.
7.3.1
Model W3
OR
6881076C20-E
1. Turn on the radio and set the volume level.
The position of the D button is not important.
2. Connect the cable from the key-variable loader (KVL) to the
microphone connector on the radio.
3. Load an encryption key into the radio's memory from a KVL
using the correct loader for the radio's encryption type.
Refer to your KVL user's manual for more information on
keyloading.
1. Press to scroll to
ERAS .
2. Press the button
below ERAS .
The last selected and
stored key is displayed.
3. Do one of the following:
NOTE: ERASED alternates with the key name if you go to a key
that has been erased.
Press to scroll forward in the list; press to scroll
backward.
With Direct Entry, press the numeric keys to jump to the desired
encryption key.
4. Go to
Section 7.4: "Erase a Single Key (Model W3)" on page 7-5
7-3
.
February 3, 2003