Technical Data - BELGACOM Belgafax 170S User Manual

Technical data

Compatibility
Connection type
Flash time
Document size
width:
length:
thickness:
Printing paper:
Largest scanning
width
Resolution horizontal
Resolution vertical
PHOTO mode
Contrast control
Copying
Data compression
Modulation
Transmission speeds
SMS storage capacity
Noise level
Printing method
Document feed
Fax switch
32
ITU Group 3
outside line (PSTN)
extension (PABX)
100 ms
single sheet:
148–217 mm
several sheets
148–217 mm
single sheet:
100–600 mm
several sheets:
148–297 mm
single sheet:
0,06–0,15 mm
several sheets:
0,08–0,12 mm
A4 210 x 297 mm, 80
g/m²
216 ± 1 mm
8 points/mm (200 dpi)
standard 3.85 lines/mm
FINE 7.7 lines/mm
16 grey tones
64 grey tones (only
with built-in answering
machine)
automatic and manual
FINE/PHOTO
(resolution)
MH, MR
V29bis, V27ter, V21,
V17
9600/7200/4800/
2400bps (without built-
in answering device)
14k4 ( with built-in
answering device)
30 received messages
on standby: < 30 dBA
copying: < 53 dBA
ink fi lm printer
up to 10 letters
(80 g/m²)
DAY/NIGHT/TIMER
Dimensions
Weight
Power consumption
Power supply
Speech recording
time
Allowed operating
environment
Recommended
operating
environment in use
Recommended
operating
environment in
unplugged status
(ready for operation
with loaded ink fi lm
and paper)
Interference
suppression
SLEREXE-Letter
318x202x146 mm
without paper tray
about 2 kg
stand by: about 2 W
telephoning: about 4 W
sending a standard
letter < 20 W
receiving a standard
letter < 30 W
220–240 V / 50–60 Hz
up to 30 Minuten (with
built-in answering
device)
temperature: 5–40 °C,
relative humidity:
15–85 % RH not
condensing
temperature: 17–28 °C,
relative humidity:
20–80 % RH, not
condensing
temperature: 0–45 ° C,
relative humidity:
15–85 % RH not
condensing
emission corresponding
to EN 55022/VDE
0878 Part 1 Class B