Basic Settings; Display Language; Help Function; Time And Date - BELGACOM Belgafax 170S User Manual

Table of Contents

Advertisement

Basic Settings

If you want to keep a note of the factory settings
on your machine for later, we recommend prin-
ting out a function list before you change any of
the settings: Press once M and twice OK.
If you press a wrong key by mistake, press the
STOP key as often as necessary to return to the
original position. If you have entered a wrong
digit or character, you can correct it with u
and C.
If you want to delete your individual settings, you
can do so in function 45 Service code (see Hints
and Tips / Service code).

Display language

1 Select function 11 by pressing M, 11 and
OK.
2 Select the desired language with u.
3 Press OK.

Help function

Press HELP/w twice. You will receive a prin-
tout explaining how to use the most important
functions. It also specifi es how to obtain further
HELP pages concerning other features of your
fax machine.

Time and date

1 Select function 12 by pressing M, 12 and
OK.
2 Enter the correct time using the number keys
(e.g. 09 15 for 9:15 a.m.). Your fax ma-
chine will now ask you for the correct date
(e.g. 15 05 04 for May 15th, 2004).
3
Press OK.
v The time of the machine is synchronized
with the CLIP function only if the diffe-
rence is less than 90 minutes.

Your number

1 Select function 13 by pressing M, 13 and
OK.
2 Enter your telephone or fax number. (e.g.
#44>6151... for +44 6151... – use
# or * to enter the "+", that is often used
in international fax numbers in front of the
country code, and > to enter a space. You
can enter a maximum of 20 characters).
3 Press OK.

Your name

1 Select function 14 by pressing M, 14 and
OK.
2 Enter your name using the alphabetic keypad.
v When entering a name, you can use + to
type capital letters (press and hold the + key
and type the desired key).
3 Press OK.
"Your name" and "your telephone number"
are transmitted at the top of each page to-
gether with the date, time and page number, if
you store this data with function 13 and 14.

Correction

If you have entered a wrong letter or number in
function 13 or 14 you can correct the mistake
during the entering as well as later. If you want to
make your corrections later you have to select the
functions for entering numbers or names once
again.
Use u to place the cursor under the character
you want to delete. Press C to delete the charac-
ter. A long press on C (two seconds) will delete
the whole line. Press OK.
Ring signal type
You can choose from ten different types of si-
gnals.
1 Select function 35 by pressing M, 35 and
OK.
2 Select the desired ring signal with 0 to 9.
3 Press OK.
11

Advertisement

Table of Contents
loading

Table of Contents