Table of Contents
Advertisement
•
your telephone number
Example for using a service code:
1 Select M, 45 and press OK. Enter the ser-
vice code (7117 or 7140). Press OK.
2
you really want to delete your settings. Confi rm
with OK. Your fax machine will be reset to its
original confi guration.
Care
Before opening the fax machine, make sure that
you are electrically discharged by e.g. touching the
metal housing of a grounded appliance, a water
pipe or radiator.
Use a soft, fl uff-free cloth lightly moistened with
a little alcohol (96%). You can also use a special
cloth for cleaning fax machines (see Delivery
Service). Do not allow any moisture to penetrate
inside the device.
Clean the scanner glass
1 Open the paper feed fl ap and carefully pull
out the paper. Close the fl ap again.
2 Open the operation panel by lifting in the
middle. When you hear a soft click, the panel
is engaged.
28
With u you can select whether
3 Open the scanner cover by pressing the two
lugs in. The cover will open downwards.
4 Use a soft cloth to gently wipe the scanner
glass on the top (A) and the white strips on
the bottom (B).
5 Close the scanner cover on the left and right,
making sure it clicks into place.
6 Close the panel so that it also clicks into
place.
7 Insert paper (see Installation / Loading pa-
per).
Troubleshooting
If you cannot fi x the problem based on the ins-
tructions below, you should proceed as follows:
Advertisement
Table of Contents
