Provision ISR Mini Ultra-Z Z-10AHD-1 (IR) PTZ User Manual page 23

There are three group numbers, the left side is preset number, the right side
is dwell time; tour from left to right, up to down in the order to run preset;
when the preset number is set to < 000>, the current preset is skipped;

<SAVE AND BACK>: Save the tour and back.

<CANCEL AND BACK>: Quit without saving and then exit to the upper
menu.
4.7.3 PATTERN
<Main Menu>  <AUTO RUNNING>  <PATTERN>
There are max 4 patterns, and the dome camera can record all regular
operation in 3 minutes at least. The command will drive the speed dome runs
as given route repeatedly.

<PATTERN NUMBER>: Set current pattern number from 001～004.

<RECORD>: Edit the current pattern's running route and record all
operation in 3 minutes at least.
Notice: If any of the time/space is finished, the recording will saved and exit
PATTERN NUMBER: 001
RECORD
RUN
BACK
EXIT
SET START POINT...
CALL PRE 1 CONFIRM
AND BEGIN RECORDING
CALL PRE 2 CANCEL
22