Displaying Mac Address Bindings For Arp Packets; Displaying Entries In The Ip Source Guard Table; Figure 85: Dynamic Arp Inspection Table; Figure 86: Dynamic Ip Source Guard Table - Digisol DG-GS4528S User Manual

D MAC
ISPLAYING
A B
DDRESS INDINGS
ARP P
FOR ACKETS
D E
ISPLAYING NTRIES
IP S
IN THE OURCE
G T
UARD ABLE
Open the Dynamic ARP Inspection Table to display address entries sorted
first by port, then VLAN ID, MAC address, and finally IP address.
Each page shows up to 999 entries from the Dynamic ARP Inspection table,
default being 20, selected through the "entries per page" input field. When
first visited, the web page will show the first 20 entries from the beginning
of the Dynamic ARP Inspection Table.
CLI R
EFERENCES
"security network arp inspection status" on page 389
◆
W I
EB NTERFACE
To display the Dynamic ARP Inspection Table, click Monitor, Security,
Network, ARP Inspection.

Figure 85: Dynamic ARP Inspection Table

Open the Dynamic IP Source Guard Table to display entries sorted first by
port, then VLAN ID, MAC address, and finally IP address.
Each page shows up to 999 entries from the Dynamic IP Source Guard
table, default being 20, selected through the "entries per page" input field.
When first visited, the web page will show the first 20 entries from the
beginning of the Dynamic IP Source Guard Table.
CLI R
EFERENCES
"security network ip source guard status" on page 386
◆
W I
EB NTERFACE
To display the Dynamic IP Source Guard Table, click Monitor, Security,
Network, IP Source Guard.

Figure 86: Dynamic IP Source Guard Table

– 219 –
| Monitoring the Switch
C 5
HAPTER
Displaying Information About Security Settings