Download Print this page

Visonic DE1260 DISCOVERY QUAD Installation Instructions

Advanced quad pir motion detector

Advertisement

Quick Links

DISCOVERY QUAD
Advanced QUAD PIR Motion Detector
1. FEATURES
Quad element pyroelectric sensor
Patented sophisticated motion analysis algorithm - True
Motion Recognition™
Integral swivel bracket for wall or ceiling installation
Sealed chamber protects the optical system
Programmable motion event counter (1, 2 or 3 events)
Three-position vertical pattern adjustment
Low current consumption
Microprocessor-controlled temperature compensation
Test input to remotely enable/disable the walk-test LED (per
new European standard)
Free terminal for connecting an E.O.L. resistor
Snap-in pet alley mask
White light protection
Elegantly styled, sturdy case
Keyhole-shaped slot for easy removal of PCB
2. SPECIFICATIONS
OPTICAL
Detection Pattern: 90° wide angle lens with 19 quad zones in 3
detection layers. Max. coverage is 15 x 15 m (50 x 50 ft).
Pet Alley: Plastic mask may be fitted internally, leaving only 9
quad zones in a single layer, with the same view angle and
coverage area as above.
Adjustment: 3-position vertical adjustment scale: PET, FAR,
NEAR.
Figure 2. Coverage Pattern
DE1260 DISCOVERY QUAD Installation Instructions
Installation Instructions
Figure 1. The Discovery Quad Detector
ELECTRICAL
Input Voltage: 9 to 16 VDC
Current @ 12 VDC: 10 mA standby, 19 mA on alarm (LED ON)
Alarm Relay: Normally closed (fail-safe) contacts with 18-ohm
resistor in series. Rating - 0.1 A resistive / 30 VDC.
Tamper Output: Normally closed contacts rated at 50 mA
resistive / 30 VDC.
Alarm Period: 4 seconds.
True Motion Event Verification: 3 position selector - 1, 2 or 3
motion events.
LED Control: Walk test enabled / disabled by internal link
Detector Type: Quad element low-noise pyroelectric sensor.
MOUNTING
Height: Up to 3.6 m (12 ft)
Room Size:
Up to 15 m (50 ft) in the "FAR" and "PET" positions
2 - 8 m (6 - 24 ft) in the NEAR position.
Installation Options:
Surface or corner (without bracket);
surface or ceiling (with bracket).
Bracket Adjustment: 20° downward, 20° left and right.
ENVIRONMENTAL
RFI Protection: >30 V/m up to 1000 MHz.
Operating Temperatures: -10°C to 50°C (14°F to 122°F).
Storage Temperatures: -20°C to 60°C (-4°F to 140°F).
PHYSICAL
Dimensions (H x W x D): 117 x 65 x 47 mm.
(4-5/8 x 2-9/16 x 1-7/8 in.).
Weight: 98 g (3.4 oz) without bracket, 113 g (4 oz) with bracket.
PATENTS
U.S. Patent No.: 5,693,943
1

Advertisement

loading

Summary of Contents for Visonic DE1260 DISCOVERY QUAD

  • Page 1 Dimensions (H x W x D): 117 x 65 x 47 mm. (4-5/8 x 2-9/16 x 1-7/8 in.). Weight: 98 g (3.4 oz) without bracket, 113 g (4 oz) with bracket. PATENTS U.S. Patent No.: 5,693,943 Figure 2. Coverage Pattern DE1260 DISCOVERY QUAD Installation Instructions...
  • Page 2 Figure 6. Attaching the Bracket D. Assemble the bracket as shown in Figure 6. E. Rotate the bracket to the desired position (see Figure 7) but Figure 4. PCB Removal do not yet tighten the screw fully. DE1260 DISCOVERY QUAD Installation Instructions...
  • Page 3 Figure 11. B. Push the prefabricated plastic mask into place within the lens retainer, as shown in Figure 12. Figure 14. Motion Event Counter Setting Options C. Remount the lens retainer within the front cover. DE1260 DISCOVERY QUAD Installation Instructions...
  • Page 4 If this WARRANTY Visonic Limited (the “Manufacturer") warrants this product only (the "Product") to the original purchaser only (the However, if the Manufacturer is held liable, whether directly or indirectly, for any loss or damage arising under this “Purchaser”) against defective workmanship and materials under normal use of the Product for a period of twelve...