Mounting The Switch In A Rack - Cisco Catalyst 3650 Hardware Installation Manual

Chapter 2 Switch Installation

Mounting the Switch in a Rack

After the brackets are attached to the switch, use the supplied Phillips machine screws to attach the
brackets to the rack
left or right bracket.
When you complete the switch installation, see the
for more information switch configuration.
Figure 2-10
1
1
2
When you complete the switch installation, see the
for more information about switch configuration.
OL-29734-01
(Figure 2-11). Use the black Phillips machine screw to attach the cable guide to the
Mounting the Switch in a Rack
2
4
Phillips machine screw, black
Cable guide
"After Installing the Switch" section on page 2-14
3
3 Front-mounting position
4 Number-12 or number-10 Phillips machine
screws
"After Installing the Switch" section on page 2-14
Catalyst 3650 Switch Hardware Installation Guide
Installing the Switch
2-13