Sfp And Sfp+ Modules - Cisco Catalyst 3650 Hardware Installation Manual

Appendix 7 Connector and Cable Specifications

SFP and SFP+ Modules

Figure
The switch supports the SFP module patch cable, a 0.5-meter, copper, passive cable with SFP module
connectors at each end
connect two Catalyst 3650 switches in a cascaded configuration.
Figure 7-4
Figure 7-5
Figure 7-6
OL-29734-01
7-4, Figure 7-5, and Figure 7-6
(Figure
Duplex LC Cable Connector
Simplex LC Cable Connector
Copper SFP Module RJ-45 Connector
Pin Label
1 TP0+
2 TP0-
3 TP1+
4 TP2+
5 TP2-
6 TP1-
7 TP3+
8 TP3-
show the SFP module connectors.
7-7). This cable can be used (only with 1-Gigabit Ethernet SFP ports) to
1 2 3
Catalyst 3650 Switch Hardware Installation Guide
Connector Specifications
4 5 6 7 8
7-3