Applying The Nortel Snas License; Nortel Secure Network Access Installation — Quick Start Switch - Nortel 4070 Installation Manual

40 Configuration
9
10
11

Applying the Nortel SNAS license

The Nortel SNAS ships with support for up to 200 authenticated user
sessions. To support additional users on your Nortel SNAS switch, you must
obtain a Nortel SNA software license file. The software license file contains
a software license key that you must enter into the Nortel SNAS switch to
activate support for the additional users. The file can support an additional
100, 250, 500, 1000, 2000, or, 5000 users.
The following table lists the part number for the additional concurrent
endpoints.
Part Number
EB1639171
EB1639172
EB1639175
EB1639182
Copyright © 2008, Nortel Networks
.
>> Administrative Applications# https
(Optional) From the HTTPS access menu, designate a port for
HTTPS access using the port command.
>> HTTPS# port <port_number>
Using a port other than 4443 requires the user to designate the port
when accessing the BBI. For example, if the device IP address is
192.168.0.3 and the designated port is 465, the device is accessed
from the browser as: https://192.168.0.3:465.
(Optional) From the HTTPS access menu, enable BBI access using
the ena command.
>> HTTPS# ena
(Optional) Finalize the changes using the apply command.
>> HTTPS# apply
Description
Secure Network Access License - Add 100 concurrent
endpoints
Secure Network Access License - Add 250 concurrent
endpoints
Secure Network Access License - Add 500 concurrent
endpoints
Secure Network Access License - Add 1000 concurrent
endpoints
Nortel Secure Network Access
Installation — Quick Start Switch 4070
NN47230-303 01.01 Standard
2.0 28 July 2008
—End—